This application is intended for users who are away from the AWG instrument and want to load waveforms to the desired channel, save and open the AWG setup files and set the channel, clock, trigger parameters and select the Force Trigger functionality in the AWG. Additionally the users can play the waveforms from the Android App.
1.1 Features:
Control and Monitor AWG remotely
Two channels (CH1/CH2) supported
Open/Save the AWG setup files
Open and Assign a waveform file to the respective channels
Required channels can be switched on/off in the Application
Apply Force Trigger A and Force Trigger B functionality
Set the Run Mode to Continuous/Triggered/Trig’d Continuous
Play/Stop waveform in the application
Control Channel 1 and Channel 2 Settings
Control Clock Settings
Control Trigger Settings
Advantages:
Control and Monitor AWG remotely
Supported AWG Series:
AWG70001A and AWG70002A
2.0 Installation Instructions:
Prerequisite:
1. The user needs to be on the same network to which the instrument is connected.
Cisco AnyConnect – This is required to connect to VPN of the AWG instrument for communicating between the AWG instrument and the mobile device.
2. AWG Android App installed on the mobile device.
2.1 Start the Raw Socket Server in the AWG instrument following the below steps.
start tekvisa lan server control from start->all programs->tekvisa->tekvisa lan server control
In the Task tray right click on TekVISA LAN Server Control and select “Start Socket Server”
Note:
• Sometimes Windows doesn't allow Socket Server. Then you have to set firewall to allow Socket Server
Now you are ready for communicating with the AWG instrument from the Android device.
Click on AWG Android Application by clicking on the AWG icon in your phone and enter the AWG instrument IP address.After the instrument gets connected, start communicating with the instrument.
3. Android Version Supported
The app has been tested on Android mobile devices with Android Version 4.1 to 4.3
4. Resolution of Mobile Devices
The resolutions that the AWG Android Application will work is specified in the below Table. Please make sure that the AWG Android app is installed in the devices with the below specified resolutions.
Screen size (inches) Resolution
3.4 480 * 800
3.7 480 * 800
4 480 * 800
4.4 480 * 800
4.7 480 * 800
5 480 * 800
5.5 1280 * 720
8 1280 * 800
4.1 Example mobile Display Settings and Android Version supported for an 8 inch tab is specified below.
Display Settings
Font Style Default font
Font Size Normal
About Device
Android Version 4.2.2
Baseband Version T311DDUAMH1
Kernel version 3.0.31-1334189
Resolution 1280*800
Screen Size 8 inch
5. TekVISA version supported
4.0.0.80
Technical Support: Please send Email to [email protected] for support and feedback on the application.
We do not host Tek AWG Connect on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for Tek AWG Connect is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
| ||||
Downloads: 4 | ||||
Updated At: 2024-04-19 22:23:45 | ||||
Publisher: Tektronix | ||||
Operating System: Android | ||||
License Type: Free |